电力工业标准-电力网-万方数据知识服务平台

2 环境试验.第2部分:试验.试验Kb:循环盐雾(氯化钠溶液) - 摘要

この規格は，電気・電子部品，又は機器に適用し,選択した厳しさに応じて，塩分を含んだ大気に耐えるように設計されたその他の製品にも適用する。
JIS C60068-2-52-2000 - 中外标准 - JIS- 2000/1 - 现行
关键词：环境试验耐久试验喷雾腐蚀试验 environmental testing endurance testing salts water sprays corrosion tests

3 外壳提供的保护程度 (IP 代码) - 摘要
NF C20-010/A1-2000 - 中外标准 - NFBASE- 2000/1 - 现行
关键词：防护电气设备识别系统名称与符号杂质可及性代码 IP外壳接触安全装置电接触保护分类系统防护等级国际防护等级代码合格试验外壳电气工程定义电驱动装置编码水防爆通路 Access Accessibility Classification systems Codes Contact safety devices Definition Definitions Degrees of protection Designations Electric contact protection Electric enclosures Electrical engineering Electrical safety Electrically-operated devices Enclosure Enclosures Encoding Explosion protection Identification methods Identification system IEC testing fingers Impurity Incription IP IP code IP enclosure Marking Probes Protected electrical equipment Qualification tests Safety Safety engineering Specification (approval) Symbols Test equipment Test fingers Testing Water

4 电气/电子可程序化电子安全相关系统的功能安全性.第7部分:技术和手段的概述 - 摘要

1.1この規格第7部には，規格の第2部と第3部に関連のある種々の安全技術及び手法の概観をまとめている.1.2この規格群の第1部，第2部，第3部及び第4部は，低複雑度E/E/PE安全関連系(第4部3.4.4参照)には適用しないが.基木安全規格である。1.3図1に，この規格群の第1部から第7部までの全フレームワーク.及びE/E/PE安全関連系による機能安全達成での第7部の役割を示す。
JIS C0508-7-2000 - 中外标准 - JIS- 2000/1 - 现行
关键词：计算机控制加工设备电气安全过程控制数值控制程序设计技术 numerical control computerized control production equipment programming techniques process control electrical safety

5 电气/电子可程序化电子安全相关系统的功能安全性.第6部分:第2和3部分的应用指南 - 摘要

1.1第6部は第2部及び第3部に関する情報及び指針を示す。1.2この規格群の第1部，第2部，第3部及び第4部は，低複雑度E/E/PE安全関連系(第4部3.4.4参照)には適用しないが基本安全規格である。1.3図1に，この規格群の第1部から第7部までの全フレームワーク及びE/E/PE安全関連系による機能安全達成での第1部の役割を示す。
JIS C0508-6-2000 - 中外标准 - JIS- 2000/1 - 现行
关键词：程序设计技术数值控制过程控制电气安全加工设备计算机控制 numerical control computerized control production equipment programming techniques process control electrical safety

6 体系结构描述的推荐规程 - 摘要

Addresses the architectural description of software-intensive systems. A software-intensive system is any system where software contributes essential influences to the design, construction, deployment, and evolution of the system as a whole.
IEEE 1471-2000 - 中外标准 - IEEE- 2000/1 - 现行
关键词：通信系统计算机软件系统建筑学软件技术成本管理可行性显影质量保证数据处理定义 Communication systems Computer software Costs Data processing Definition Definitions Developments Effectiveness Management Quality assurance Software techniques System architecture

7 建筑平面图用布线图的图形符号 - 摘要

この規格は，構内電気設備の電灯，動力，通信・情報，防災・防犯，避雷設備，屋外設備などの配線，機器及びそれらの取付位置，取付方法を示す図面に使用する図記号について規定する。
JIS C0303-2000 - 中外标准 - JIS- 2000/1 - 现行
关键词：室内照明电气布线系统图形符号符号线路图内部图解表示法图形表示 graphic symbols symbols graphic representation internal circuit diagrams interior lighting

8 三相交流系统中的短路电流第4部分:短路电流计算举例 - 摘要

This part of IEC 60909 is a technical report intended to give help for the application of IEC 60909-0 for the calculation of short-circuit currents in 50 Hz or 60 Hz three-phase a.c. systems. This technical report does not include additional requirements but gives support for the modelling of electrical equipment in the positive-sequence, the negative-sequence and the zero-sequence system (clause 2) and the practical execution of calculations in a low-voltage system (clause 3), a medium-voltage system with asynchronous motors (clause 4) and a power-station unit with its auxiliary network feeding a large number of medium-voltage asynchronous motors and low-voltage motor groups (clause 5). The three examples given in clauses 3, 4 and 5 are similar to those given in IEC 60909 (1988) but they are revised in accordance with IEC 60909-0, which replaces it. A subclause is added to the example in clause 3 to give a comparison between the results found with the application of the equivalent voltage source at the short-circuit location following the procedure given in IEC 60909-0 on the one hand, and results found with the superposition method on the other hand, taking into account different load-flow conditions before the short circuit. Clause 6 of this technical report gives the circuit diagram and the data of a test network and the results for a calculation carried out in accordance with IEC 60909-0, to offer the possibility for a comparison between the results found with a digital program for the calculation of short-circuit currents and the given results for Ik", ip, Ib, Ik, Ik1" and ip1 in a high-voltage network with power-station units, generators, asynchronous motors and lines in four different voltage levels 380 kV, 110 kV, 30 kV and 10 kV.
IEC/TR 60909-4-2000 - 中外标准 - IEC- 2000/1 - 现行
关键词：效应电气工程短路电流三相电流电流交流电流数学计算 Alternating current Currents Effects Electric power networks Electrical engineering Electrically-operated devices Fault currents High voltage Low voltage Mathematical calculations Properties Short circuit impedance Short circuits Short-circuit currents Symbols Three-phase current Three-phase networks Berechnung Drehstrom Drehstromnetz Eigenschaft elektrisches Betriebsmittel Elektrotechnik Fehlerstrom Formelzeichen Hochspannung Kurzschluss Kurzschlussimpedanz Kurzschlussstrom Niederspannung Strom Stromversorgungsnetz Wechselstrom Wirkung

9 静电.第2-2部分:测量方法.充电率的测量 - 摘要

Describes the equipment, arrangement and procedures for measurement of electrostatic charge caused by contact and relative motion between materials and presents examples of model experiment to simulate practical processes.
PD 61340-2-2-2000 - 中外标准 - BSBASE- 2000/1 - 现行

10 高电压试验技术.部分放电测量 - 摘要

This International Standard is applicable to the measurement of partial discharges which occur in electrical apparatus, components or systems when tested with alternating voltages up to 400 Hz or with direct voltage.This standard- defines the terms used;- defines the quantities to be measured;- describes test and measuring circuits which may be used;- defines analogue and digital measuring methods required for common applications;- specifies methods for calibration and requirements of instruments used for calibration;- gives guidance on test procedures;- gives some assistance concerning the discrimination of partial discharges from external interference.The provisions of this standard should be used in the drafting of specifications relating to partial discharge measurements for specific power apparatus. It deals with electrical measurements of impulsive (short-duration) partial discharges, but reference is also made to non-electrical methods primarily used for partial discharge location (see annex F).Diagnosis of the behaviour of specific power apparatus can be aided by digital processing of partial discharge data (see annex E) and also by non-electrical methods that are primarily used for partial discharge location (see annex F).This standard is primarily concerned with electrical measurements of partial discharges made during tests with alternating voltage, but specific problems which arise when tests are made with direct voltage are considered in clause 11.The terminology, definitions, basic test circuits and procedures often also apply to tests with other frequencies, but special test procedures and measuring system characteristics, which are not considered in this standard, may be required.Annex A provides normative requirements for performance tests on calibrators.
IEC 60270-2000 - 中外标准 - IEC- 2000/1 - 现行
关键词：性能试验排量测量电学测量校正耐高压试验电气工程试验技术定义校准仪规范(验收) 高电压技术放电测量试验高电压测量技术测量系统电气试验试验条件试验电压局部放电测量不确定度高压试验技术 Calibration Calibrator Definitions Discharge Discharge measurement Electric discharges Electrical engineering Electrical measurement Electrical testing High voltage High-voltage techniques High-voltage test technique High-voltage tests Measurement Measuring incertainity Measuring systems Measuring techniques Partial discharges Performance tests Specification (approval) Test techniques Testing Testing conditions Testing voltages Abflussmessung Anforderung Begriffe Definition Eignungsprüfung elektrische Entladung elektrische Messung elektrische Prüfung Elektrotechnik Entladung Hochspannung Hochspannungsprüftechnik Hochspannungsprüfung Hochspannungstechnik Kalibrator Kalibrierung Messsystem Messung Messunsicherheit Messverfahren Prüfbedingung Prüfspannung Prüftechnik Prüfung Prüfverfahren Teilentladung

共 7 页 1 2 3 4 5 6 7 下一页末页

火力发电

环境保护

电站锅炉

汽轮机

汽轮发电机

热工控制

水力发电

水电站类型

水工建筑物

主要坝型

水电站主要设备

智能水电厂

核能发电

反应堆

核电设备

核电安全

风力发电

风电场

风电机组

风电设备

运行方式

光伏发电

核心设备

电网影响

光伏应用

电力输送

高压直流输电(HVDC)

柔性输电

输电线路

保护及重合闸

变电系统

一次设备

二次设备

变电站继电保护

智能变电站

变电站分类

研究专题

配电网

主要设备

关键技术

配电自动化

接地方式

故障及分析方法

设计规划

电源及负荷规划

电网规划设计

计算和分析

无功补偿和电压调整

经济性

电力行业论文

能源、技术类论文

经营管理类论文

相关论文

电力行业期刊

行业学会/协会/企业刊物

电力期刊按学科分类

电力期刊按行业分类

电力行业成果

电力行业成果学科分类

电力行业专利

电气工程

热力工程

水利工程

转动机械

燃料、化学

信息通讯

其他相关专利

电力工业标准

能源、核技术

电工

电子与信息技术

仪器仪表

工程建设

其他相关行业

电力行业机构

电力企业

采矿业

制造业

展开标准分类

展开标准类型