电力工业标准-电力网-万方数据知识服务平台

1 往复式内燃机驱动的交流发电机组.低功率发电机组要求和试验 - 摘要
BS ISO 8528-8-2016 - 中外标准 - BSBASE- 2016/1 - 现行
关键词：Electric generators Alternating-current generators Electric machines Electrical equipment Reciprocating engines Internal combustion engines Prime movers Low-voltage equipment Impact testing Mechanical testing Stability Fire safety Electrical safety Electrical testing Control systems Performance testing Marking Instructions for use Switchgear Protective barriers Temperature Overload protection Type testing Leakage currents Dielectric strength Protection against electric shocks

2 往复式内燃机驱动的交流发电机组.安全性 - 摘要
BS EN ISO 8528-13-2016 - 中外标准 - BSBASE- 2016/1 - 现行
关键词：Electric generators Alternating-current generators Electric machines Internal combustion engines Reciprocating engines Prime movers Electric power generation Equipment safety Safety measures Hazards Safety devices Verification Instructions for use Marking Locking devices Stabilization Fuses

3 液压机. 卡普兰, 弗朗西斯, 水斗式涡轮机水冲蚀处理指南 - 摘要
BS EN 62364-2013 - 中外标准 - BSBASE- 2013/1 - 现行
关键词：Abrasion Abrasive processes Corrosiveness Definitions Deterioration Electrical engineering Erosion Erosion corrosion Francis Guide books Hydraulic machines Hydroelectric power stations Impulse turbines Kaplan Pelton Turbines Water turbines

4 水轮机控制系统规范指南 - 摘要
BS EN 61362-2012 - 中外标准 - BSBASE- 2012/1 - 现行
关键词：检验控制设备控制系统定义发电站指导手册液压系统性能规范涡轮机水轮机 Checks Control equipment Control systems Definitions Electric power stations Guide books Hydraulic systems Performance Specification Turbines Water turbines

5 非干扰电力系统(UPS).规定性能和试验要求的方法 - 摘要
BS EN 62040-3-2011 - 中外标准 - BSBASE- 2012/1 - 现行
关键词：存储设备交流电流交流电力蓄电池供电连续的定义直流电流效率电能电力系统电气工程电驱动装置电子设备及元件检验文电使用条件使用特性性能无源的特性质量供应测量要求试验可不中断的 Accumulator devices Alternating current Alternating powers Batterie operation Continuous Definitions Direct current Efficiency Electric energy Electric power systems Electrical engineering Electrically-operated devices Electronic equipment and components Inspection Messages Operating conditions Operating properties Performance Performance in service Properties Quality Supply Test requirements Testing Uninterruptable

6 往复式内燃引擎驱动的发电机组.安全性 - 摘要
BS EN 12601-2010 - 中外标准 - BSBASE- 2011/1 - 废止
关键词：交流发电机控制设备定义(术语) 发电设备评估发电机危害内燃机低电压维修作标记机械工程电动机操作发电机组往复式发动机往复式内燃机安全性机械安全性安全性要求规范(验收) 开关设备测试使用振动振动测量 Alternating-current generators Control equipment Definitions Electric power generation Equipment Evaluations Generators Hazards Internal combustion engines Low voltage Maintenance Marking Mechanical engineering Motors Operation Power generating aggregates Reciprocating engines Reciprocating internal combustion engines Safety Safety of machinery Safety requirements Specification (approval) Switchgears Testing Use Vibration Vibration measurement

7 液压机械.小型水力发电装置的验收试验 - 摘要

This International Standard defines the test, the measuring methods and the contractualguarantee conditions for field acceptance tests of the generating machinery in smallhydroelectric power installations. It applies to installations containing impulse or reactionturbines with unit power up to about 15 MW and reference diameter of about 3 m. The drivengenerator can be of synchronous or asynchronous type.This International Standard contains information about most of the tests required foracceptance of the hydraulic turbine such as safety approval tests, trial operating and reliabilitytests, as well for verification of cavitation, noise and vibration conditions, if required.This standard represents the typical methods used on smaller hydroelectric installations, andis divided into three classes as follows (see Table 1 for more detail):Class A Normal test program (panel measurement)To determine the maximum power output of theinstallation.DefaultClass B Extended test programTo determine the performance characteristics of theinstallation.RecommendedClass C Comprehensive test programTo determine the absolute efficiency of the installation.OptionalNOTE All classes contain safety tests, trial operating tests, and reliability tests.This standard gives all necessary references for the contract in order to execute the test,evaluate, calculate and compare the result to the guarantee for all the classes A, B and C.The manufacturer or consulting engineer is responsible for ensuring that standardizedconnections are installed for performing these tests. This standard does not cover thestructural details of a hydroelectric installation or its component parts.
BS EN 62006-2011 - 中外标准 - BSBASE- 2011/1 - 现行
关键词：Acceptance Acceptance inspection Acoustics Delivery conditions Electrical engineering Electrical equipment Electrical installations Electromechanical devices Guarantees Hydroelectric power stations Installations Machine sets Machines Mechanical engineering Noise (environmental) Reliability Safety Safety tests Testing Vibration Vibration tests Water turbines

8 联合发电系统.规划、评估和采购用技术申报 - 摘要
BS ISO 26382-2010 - 中外标准 - BSBASE- 2010/1 - 现行
关键词：发电热和动力组合冷却成本定义可行性能量需求能量性能评估热发生加热设备计划热环境系统 Cogeneration Combined heat and power Cooling Costs Definitions Effectiveness Energy demands Energy performance Evaluation Evaluations Heat generation Heating equipment Planning Power generation Thermal environment systems

9 燃气轮机.验收试验 - 摘要
BS ISO 2314-2009 - 中外标准 - BSBASE- 2010/1 - 现行
关键词：验收验收检验验收试验基础排管式加热器热值清洁处理燃烧燃烧室压缩机控制系统对流定义驱动力效率排放平衡废气温度废气火焰监视流量测量流体燃料供给燃料燃气轮机气体发电机组炉膛热容耗热量热源泄漏量润滑油质量流动废气的质量流量数学计算测量测量仪器测量结果测量技术机械工程噪声等级核反应堆性能性能试验功率测量压力压力测量(流体) 保护设备辐射转速旋转速度饱和二次流量蒸汽符号温度温升试验热效率热发动机热的热力学时间公差(测量) 扭矩涡轮机船舶体积 Acceptance Acceptance inspection Acceptance tests Basis Calandrias Calorific value Cleaning Combustion Combustion chambers Compressors Control systems Convection Definitions Drive power Efficiency Emission Equilibrium Exhaust gas temperature Exhaust gases Flame monitoring Flow measurements Fluids Fuel supply Fuels Gas turbines Gases Generating sets Hearths Heat capacity Heat consumption Heat sources Leaks Lubricating oils Mass flow Mass flux of exhaust gases Mathematical calculations Measurement Measuring instruments Measuring results Measuring techniques Mechanical engineering Noise levels Nuclear reactors Performance Performance testing Performance tests Power measurement Pressure Pressure measurement (fluids) Protection devices Radiation Rotation velocity Rotational speeds Saturation Secondary current Steam Symbols Temperature Temperature rise Testing Thermal efficiency Thermal engines Thermics Thermodynamics Time Tolerances (measurement) Torque Turbines Vessels Volume

10 水压机轴半径.从模型到原型的性能转化方法 - 摘要

This International Standard is applicable to the assessment of the efficiency and performance of prototype hydraulic machine from model test results, with consideration of scale effect including the effect of surface roughness.This standard is intended to be used for the assessment of the results of contractual model tests of hydraulic machines.
BS EN 62097-2009 - 中外标准 - BSBASE- 2009/1 - 现行
关键词：验收(鉴定) 定义(术语) 效率电气工程能量平衡能量性能评估水压机检验规范损耗测量损失数学计算计算方法性能水轮机 Acceptance (approval) Definitions Efficiency Electrical engineering Energy balance Energy performance Evaluations Hydraulic machines Inspection specification Loss measurement Losses Mathematical calculations Methods of calculation Performance Water turbines

共 6 页 1 2 3 4 5 6 下一页末页

火力发电

环境保护

电站锅炉

汽轮机

汽轮发电机

热工控制

水力发电

水电站类型

水工建筑物

主要坝型

水电站主要设备

智能水电厂

核能发电

反应堆

核电设备

核电安全

风力发电

风电场

风电机组

风电设备

运行方式

光伏发电

核心设备

电网影响

光伏应用

电力输送

高压直流输电(HVDC)

柔性输电

输电线路

保护及重合闸

变电系统

一次设备

二次设备

变电站继电保护

智能变电站

变电站分类

研究专题

配电网

主要设备

关键技术

配电自动化

接地方式

故障及分析方法

设计规划

电源及负荷规划

电网规划设计

计算和分析

无功补偿和电压调整

经济性

电力行业论文

能源、技术类论文

经营管理类论文

相关论文

电力行业期刊

行业学会/协会/企业刊物

电力期刊按学科分类

电力期刊按行业分类

电力行业成果

电力行业成果学科分类

电力行业专利

电气工程

热力工程

水利工程

转动机械

燃料、化学

信息通讯

其他相关专利

电力工业标准

能源、核技术

电工

电子与信息技术

仪器仪表

工程建设

其他相关行业

电力行业机构

电力企业

采矿业

制造业

展开标准分类

展开标准类型