电力工业标准-电力网-万方数据知识服务平台

1 进出口电力设备检验规程第2部分:往复式内燃机驱动的交流发电机组 - 摘要

本部分规定了对进出口往复式内燃机驱动的交流发电机组的要求、检验及判定。本部分适用于陆用和船用发动机驱动的交流发电机组的进出口检验。对于某些特殊用途（例如必要的医院供电、高层建筑等）或其他型式的往复原动机（例如沼气发动机、蒸气发动机），本部分也可参照执行。
SN/T 1621.2-2005 - 中外标准 - HBBASE- 2005/1 - 现行
关键词：进口出口电力设备检验规程内燃机交流发电机组发电机组

2 大中型水轮发电机基本技术条件 - 摘要

本标准适用于与水轮机直接连接的3相50Hz、额定容量为25MVA及以上的立轴凸极同步发电机(以下简称水轮发电机)。额定容量25MVA以下的立轴凸极同步发电机及卧轴水轮发电机可参照执行。
SL 321-2005 - 中外标准 - HBBASE- 2005/1 - 现行
关键词：大中型水轮发电机水轮发电机水轮机

3 机械振动.旋转轴上测量机械振动的评定.第5部分:水力发电厂和泵站机组 - 摘要
NF E90-079-5-2005 - 中外标准 - NFBASE- 2005/1 - 现行
关键词：声学指导手册水力发电站机组机器机械工程泵送装置旋转发电机轴振动轴(旋转) 试验振动振动试验 Acoustics Guide books Hydroelectric power stations Machine sets Machines Mechanical engineering Pump installations Pumping installation Rotating generators Shaft vibrations Shafts (rotating) Testing Vibration Vibration tests

4 燃气轮机.词汇 - 摘要

この規格は，ガスタービンにおいて用途全般，すなわち産業用，石油ガス工業用，船舶用，分散形エネルギーシステム用，コンバインドサイクル及びコージェネレーション用，非常用その他で使用される発電用，機械駆動用などのガスタービンー般に用いる基本的な用語について規定する。
JIS B8040-2005 - 中外标准 - JIS- 2005/1 - 现行

5 往复式内燃交流发电机组.第6部分:试验方法 - 摘要

This part of ISO 8528 specifies the test methods to be used for characterizing an entire generating set. It applies to alternating current (a.c.) generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high-rise buildings) supplementary requirements may be necessary. The provisions of this part of ISO 8528 are intended as a basis for establishing any supplementary requirements. For a.c. generating sets driven by other reciprocating type prime movers (e.g. steam engines), this part of ISO 8528 is intended as a basis for establishing these requirements. NOTE Existing test methods for the engine (ISO 3046-1 and ISO 3046-3) and generator (IEC 60034-2) are applicable for those components. The generating set manufacturer is responsible for specifying these characteristics and the tests to be performed to verify them.
ISO 8528-6-2005 - 中外标准 - ISO- 2005/1 - 现行
关键词：内燃机原动机发电往复式发动机交流发电机发电机组铭牌机械工程发电机电气工程交流电流性能试验性能试验额定值 Alternating current Alternating-current generators Electric generators Electric power generation Electrical engineering Generators Internal combustion engines Mechanical engineering Performance Performance testing Power generating aggregates Prime movers Rating plates Ratings Reciprocating engines Testing

6 往复式内燃交流发电机组.第4部分:控制装置与开关装置 - 摘要

This part of ISO 8528 specifies the criteria for controlgear and switchgear for generating sets with reciprocating internal combustion engines. It applies to Alternating Current (a.c.) generating sets driven by Reciprocating Internal Combustion (RIC) engines for land and marine use excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies and high-rise buildings), supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as a basis for establishing any supplementary requirements. For generating sets driven by other prime movers (e.g. steam engines), this part of ISO 8528 should be regarded as a basis for establishing these requirements.
ISO 8528-4-2005 - 中外标准 - ISO- 2005/1 - 现行
关键词：额定值性能性能试验交流电流电气工程发电机控制设备机械工程控制装置铭牌发电机组交流发电机往复式发动机发电原动机内燃机开关设备 Alternating current Alternating-current generators Control devices Control equipment Electric generators Electric power generation Electrical engineering Generators Internal combustion engines Mechanical engineering Performance Performance testing Power generating aggregates Prime movers Rating plates Ratings Reciprocating engines Switchgears

7 往复式内燃机驱动的交流发电机组.第3部分:发电机组用交流发电机 - 摘要

This part of ISO 8528 specifies the principal characteristics of Alternating Current (a.c.) generators under the control of their voltage regulators when used in generating set applications. It supplements the requirements of IEC 60034-1. NOTE At present no International Standard is available for asynchronous generators. When such an International Standard is published, this part of ISO 8528 will be revised accordingly. This part of ISO 8528 applies to a.c. generators used in a.c. generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high-rise buildings), supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as the basis for establishing any supplementary requirements. For a.c. generating sets driven by other reciprocating-type prime movers (e.g. steam engines) the provisions of this part of ISO 8528 should be used as a basis for establishing these requirements.
ISO 8528-3-2005 - 中外标准 - ISO- 2005/1 - 现行
关键词：交流电流机械工程额定值性能试验发电机电气工程发电内燃机交流发电机性能发电机组铭牌往复式发动机原动机 Alternating current Alternating-current generators Electric generators Electric power generation Electrical engineering Generating sets Generators Internal combustion engines Mechanical engineering Performance Performance testing Prime movers Rating plates Ratings Reciprocating engines

8 往复式内燃交流发电机组第2部分:发动机 - 摘要

This part of ISO 8528 specifies the principal characteristics of a Reciprocating Internal Combustion (RIC) engine when used for alternating current (a.c.) generating set applications. It applies to RIC engines for a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high rise buildings), supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as the basis for establishing any supplementary requirements. The terms which define the speed governing and speed characteristics of RIC engines are listed and explained where they apply specifically to the use of the engine for driving a.c. generators. For other reciprocating-type prime movers (e.g. steam engines), the provisions of this part of ISO 8528 should be used as a basis for establishing these requirements.
ISO 8528-2-2005 - 中外标准 - ISO- 2005/1 - 现行
关键词：内燃机定义原动机发电往复式发动机交流发电机发电机组铭牌机械工程发电机电气工程电动机交流电流性能试验性能额定值 Alternating current Alternating-current generators Definitions Electric generators Electric power generation Electrical engineering Generators Internal combustion engines Mechanical engineering Motors Performance Performance testing Power generating aggregates Prime movers Rating plates Ratings Reciprocating engines

9 往复式内燃交流发电机组.第1部分:用途、定额及性能 - 摘要

This part of ISO 8528 defines various classifications for the application, rating and performance of generating sets consisting of a Reciprocating Internal Combustion (RIC) engine, Alternating Current (a.c.) generator and any associated controlgear, switchgear and auxiliary equipment. It applies to a.c. generating sets driven by RIC engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high-rise buildings) supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as the basis for establishing any supplementary requirements. For other reciprocating-type prime movers (e.g. sewage-gas engines, steam engines), the provisions of this part of ISO 8528 should be used as a basis for establishing these requirements. Generating sets meeting the requirements of this International Standard are used to generate electrical power for continuous, peak-load and standby applications. The classifications laid down in this part of ISO 8528 are intended to help understanding between manufacturer and customer.
ISO 8528-1-2005 - 中外标准 - ISO- 2005/1 - 现行
关键词：额定值性能交流电流性能试验特性电气工程设计发电机机械工程尺寸选定使用铭牌发电机组交流发电机往复式发动机发电原动机内燃机 Alternating current Alternating-current generators Applications Design Dimensioning Electric generators Electric power generation Electrical engineering Generators Internal combustion engines Mechanical engineering Performance Performance testing Power generating aggregates Prime movers Properties Rating plates Ratings Reciprocating engines

10 燃气轮机.燃气轮机装置的数据获取和趋势监控系统要求 - 摘要

This International Standard applies to data-acquisition and trend-monitoring systems for gas turbine installations and associated systems. It classifies and defines monitoring systems and their technical terms. It establishes a system for conversion and validation of measured quantities in order to enable a comparison of the various systems, their features and their performances.
ISO 19860-2005 - 中外标准 - ISO- 2005/1 - 现行
关键词：性能监控监督(认可) 燃气轮机证实诊断额定功率数据采集涡轮机定义 Data acquisition Definitions Diagnosis Gas turbines Monitoring Performance Power ratings Surveillance (approval) Turbines Validation

共 4 页 1 2 3 4 下一页末页

火力发电

环境保护

电站锅炉

汽轮机

汽轮发电机

热工控制

水力发电

水电站类型

水工建筑物

主要坝型

水电站主要设备

智能水电厂

核能发电

反应堆

核电设备

核电安全

风力发电

风电场

风电机组

风电设备

运行方式

光伏发电

核心设备

电网影响

光伏应用

电力输送

高压直流输电(HVDC)

柔性输电

输电线路

保护及重合闸

变电系统

一次设备

二次设备

变电站继电保护

智能变电站

变电站分类

研究专题

配电网

主要设备

关键技术

配电自动化

接地方式

故障及分析方法

设计规划

电源及负荷规划

电网规划设计

计算和分析

无功补偿和电压调整

经济性

电力行业论文

能源、技术类论文

经营管理类论文

相关论文

电力行业期刊

行业学会/协会/企业刊物

电力期刊按学科分类

电力期刊按行业分类

电力行业成果

电力行业成果学科分类

电力行业专利

电气工程

热力工程

水利工程

转动机械

燃料、化学

信息通讯

其他相关专利

电力工业标准

能源、核技术

电工

电子与信息技术

仪器仪表

工程建设

其他相关行业

电力行业机构

电力企业

采矿业

制造业

展开标准分类

展开标准类型