电力工业标准-电力网-万方数据知识服务平台

1 施工企业的资格鉴定 - 摘要

This European Standard specifies the definitions, procedures, criteria and their assessment as well as therespective documentation related to a system of qualification of construction enterprises.
PD CEN/TR 13833-2003 - 中外标准 - BSBASE- 2005/1 - 现行

2 特殊土工工程的执行.深度混合 - 摘要
NF P94-334-2005 - 中外标准 - NFBASE- 2005/1 - 现行
关键词：湿的混合结构工程检验现场勘测稳定烘干稳定土心土施工材料特殊土工建筑工程混合工艺结构通风实验室试验建筑检验土木工程规范(验收) 定义试验监督(认可) 土壤改良设计建筑土壤组分土壤建筑物建筑产品土工学建设工程 Building inspection Buildings Checks Civil engineering Composition of the ground Construction Construction engineering Construction materials Construction works Constructional products Definition Definitions Design Draft Dry Geotechnics Laboratory tests Mixed processes Mixing Multilingual Site investigations Soil improvement Soils Special geotechnical work Specification (approval) Stabilization Stabilized soils Structural works Structures Subsoil Surveillance (approval) Testing Wet

3 施工现场临时用电安全技术规范 - 摘要

本规范适用于新建、改建和扩建的工业与民用建筑和市政基础设施施工现场临时用电工程中的电源中性点直接接地的220/380V三相四线制低压电力系统的设计、安装、使用、维修和拆除。建筑施工现场临时用电工程专用的电源中性点直接接地的200/380V三相四线制低压电力系统，必须符合下列规定： 1 采用三级配电系统； 2 采用TN-S接零保护系统； 3 采用二级漏电保护系统。
JGJ 46-2005 - 中外标准 - HBBASE- 2005/1 - 现行
关键词：施工现场临时用电用电安全技术规范

4 建筑设计基础.对设计土工技术作业的地震作用 - 摘要

This International Standard provides guidelines for specifying seismic actions for designing geotechnicalworks, including buried structures (e.g. buried tunnels, box culverts, pipelines and underground storagefacilities), foundations (e.g. shallow and deep foundations, and underground diaphragm walls), retaining walls(e.g. soil retaining and quay walls), pile-supported wharves and piers, earth structures (e.g. earth and rockfilldams and embankments), gravity dams, landfill and waste sites.NOTE The guidelines provided in this International Standard are general enough to be applicable for both new andexisting geotechnical works. However, for use in practice, procedures more specific to existing geotechnical works can beneeded, such as those described for existing structures in ISO 13822.
ISO 23469-2005 - 中外标准 - ISO- 2005/1 - 现行
关键词：建筑物土木工程建筑工程作业建设工程定义地震防护抗震设计地震效应土工学危害数学计算地震荷载静力学建筑工程图下层土 Buildings Civil engineering Construction engineering works Construction works Definition Definitions Earthquake protection Earthquake-resistant design Earthquakes Effects Geotechnics Hazards Mathematical calculations Seismic loading Statics Structural engineering drawings Structures Subsoil

5 建筑拆除工程安全技术规范 - 摘要

本规范适用于工业与民用建筑、构筑物、市政基础设施、地下工程、房屋附属设施拆除的施工安全及管理。
JGJ 147-2004 - 中外标准 - HBBASE- 2005/1 - 现行
关键词：建筑拆除工程安全技术规范

6 工程建设地理信息系统软件通用标准 - 摘要

本标准规定了工程建设地理信息系统软件的术语和定义、总体要求、数据要求、基本功能以及系统建设与实施。本标准适用于工程建设(包括工程规划、工程勘察、工程设计、工程施工、工程维护与管理等过程)地理信息系统软件的开发和应用，其他地理信息系统软件的开发和应用可参照执行。
JG/T 181-2005 - 中外标准 - HBBASE- 2005/1 - 现行
关键词：工程建设地理信息系统软件通用标准

7 建设项目工程总承包管理规范 - 摘要

为了提高建设项目工程总承包的管理水平，促进建设项目工程总承包管理的科学化、规范化和法制化，推进建设项目工程总承包管理与国际接轨，制定本规范。本规范适用于建设项目总承包合同签订后，工程总承包企业项目组织对项目的管理。
GB/T 50358-2005 - 中外标准 - GBBASE- 2005/1 - 现行
关键词：经济学施工作业工业经济管理建设工程企业规范 construction works specification administration enterprises specifications economics management construction operations industrial economics

8 直接应用的外部装饰系统应用的标准实施规程 - 摘要

This practice provides minimum requirements for the application of Direct-applied Exterior Finish Systems. The requirements for materials, mixtures, and details shall be contained in the project plans and specifications.
1.1 This practice covers the minimum requirements and procedures for field application of Direct-applied Exterior Finish Systems (DEFS). Direct-applied exterior finish systems are coating systems applied over various substrates with non-metallic reinforcing mesh, in which the base coat ranges from not less than 1/16in. (1.6 mm) to 3/32 in. (2.4 mm) in dry thickness, depending on the mass of the reinforcing mesh. This base coat is subsequently covered with a finish coat that is available in a variety of textures and colors.
1.2 The values stated in inch-pound units are to be regarded as the standard. The metric values given in parentheses are approximate and are provided for information purposes only.
1.3 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM C1516-2005 - 中外标准 - ASTM- 2005/1 - 现行
关键词：覆层装饰 direct-applied exterior finish

9 建筑物和建筑物系统周期成本测算的标准实施规程 - 摘要

LCC analysis is an economic method for evaluating a project or project alternatives over a designated study period. The method entails computing the LCC for alternative building designs or system specifications having the same purpose and then comparing them to determine which has the lowest LCC over the study period.

The LCC method is particularly suitable for determining whether the higher initial cost of a building or building system is economically justified by reductions in future costs (for example, operating, maintenance, repair, or replacement costs) when compared with an alternative that has a lower initial cost but higher future costs. If a building design or system specification has both a lower initial cost and lower future costs relative to an alternative, an LCC analysis is not needed to show that the former is the economically preferable choice.

If an investment project is not essential to the building operation (for example, replacement of existing single-pane windows with new double-pane windows), the project must be compared against the x201C;do nothingx201D; alternative (that is, keeping the single pane windows) in order to determine if it is cost effective. Typically the x201C;do nothingx201D; alternative entails no initial investment cost but has higher future costs than the proposed project.
1.1 This practice establishes a procedure for evaluating the life-cycle cost (LCC) of a building or building system and comparing the LCCs of alternative building designs or systems that satisfy the same functional requirements.

1.2 The LCC method measures, in present-value or annual-value terms, the sum of all relevant costs associated with owning and operating a building or building system over a specified time period.

1.3 The basic premise of the LCC method is that to an investor or decision maker all costs arising from an investment decision are potentially important to that decision, including future as well as present costs. Applied to buildings or building systems, the LCC encompasses all relevant costs over a designated study period, including the costs of designing, purchasing/leasing, constructing/installing, operating, maintaining, repairing, replacing, and disposing of a particular building design or system.
ASTM E917-2005(2010) - 中外标准 - ASTM- 2005/1 - 现行
关键词：building economics building systems cost analysis engineering-economics life-cycle costs present-value analysis Present value (PV) analysis Cost analysis (of building constructions) Engineering economics Life-cycle cost (LCC) analysis

10 建筑施工现场要求和办公通常收益的标准分类 - 摘要

4.1 This classification defines an integral part of any construction estimate and cost record. It classifies the non-permanent portion of construction activity that is essential to allow physical implementation of the required work to take place.
4.2 Used in conjunction with UNIFORMAT II, this classification provides for consistent and complete estimating of building construction work, especially during the design phase. The same considerations of consistent use and commonality to all work have been applied here.
4.3 This classification is sufficiently generic to allow its use in estimating all forms of construction work and through all stages of planning, design, use, and disposal. Additionally, it is appropriate for use in both elemental estimates and trade estimates.
1.1 This standard covers a classification for field requirements, office overhead, and profit for use in construction estimating. This classification is common to all forms of construction, and its components are an integral part of any construction cost estimate. The classification serves as a consistent reference for analysis, evaluation, and monitoring during the feasibility, planning, design, and construction phases of building. Used in conjunction with UNIFORMAT II and other elemental classifications, including Classification E2168, it also ensures consistency in the economic evaluation of construction work across time and from project to project. Through consistency in estimating and cost recording it enhances reporting at all stages in constructionfrom feasibility and planning through the preparation of working documents, construction, maintenance, rehabilitation, and disposaland is a necessary part of the reporting process described in Practice E1804.

1.2 This classification applies to all construction work.

1.3 This classification is not based on permanent physical elements of construction (as defined and classified in Classification E1557). Rather, the classification items are major, non-permanent, cost components common to all construction work. They perform the same function and provide for similar needs regardless of the design, specification, construction method, or materials used in the physical construction.
ASTM E2083-2005(2010) - 中外标准 - ASTM- 2005/1 - 现行
关键词：building economics classification construction element construction estimating construction field requirements cost control cost estimating cost planning elemental estimate elemental format general accounts general conditions general requirements overhead profit trade estimate UNIFORMAT II UNIFORMAT Classification (standards)--offices Construction--building materials/applications Cost analysis (of building constructions) Elemental building classification General accounts/conditions/requirements Office environment

共 4 页 1 2 3 4 下一页末页

火力发电

环境保护

电站锅炉

汽轮机

汽轮发电机

热工控制

水力发电

水电站类型

水工建筑物

主要坝型

水电站主要设备

智能水电厂

核能发电

反应堆

核电设备

核电安全

风力发电

风电场

风电机组

风电设备

运行方式

光伏发电

核心设备

电网影响

光伏应用

电力输送

高压直流输电(HVDC)

柔性输电

输电线路

保护及重合闸

变电系统

一次设备

二次设备

变电站继电保护

智能变电站

变电站分类

研究专题

配电网

主要设备

关键技术

配电自动化

接地方式

故障及分析方法

设计规划

电源及负荷规划

电网规划设计

计算和分析

无功补偿和电压调整

经济性

电力行业论文

能源、技术类论文

经营管理类论文

相关论文

电力行业期刊

行业学会/协会/企业刊物

电力期刊按学科分类

电力期刊按行业分类

电力行业成果

电力行业成果学科分类

电力行业专利

电气工程

热力工程

水利工程

转动机械

燃料、化学

信息通讯

其他相关专利

电力工业标准

能源、核技术

电工

电子与信息技术

仪器仪表

工程建设

其他相关行业

电力行业机构

电力企业

采矿业

制造业

展开标准分类

展开标准类型