电力工业标准-电力网-万方数据知识服务平台

1 欧洲法规.设计基础 - 摘要
NF P06-100-1/A1-2006 - 中外标准 - NFBASE- 2006/1 - 现行
关键词：基础建筑规则建筑物土木工程建筑建筑工程施工材料设计尺寸选定效应欧洲法规数学计算计划可靠度安全要求规范(验收) 稳定性静力学结构工程图结构验证 Basis Building code Buildings Civil engineering Construction Construction engineering Construction materials Design Dimensioning Effects EUROCODE Mathematical calculations Planning Reliability Safety requirements Specification (approval) Stability Statics Structural engineering drawings Structures Verification

2 建筑环境设计.室内环境.一般原则 - 摘要

This International Standard establishes the general principles of building environment design taking into account healthy indoor environment for the occupants, and protecting the environment for future generations. This International Standard promotes an approach in which the various parties involved in building environmental design collaborate with one another to provide a sustainable building environment. The unique features of the design process are articulated by the following aims:— to provide the constraints concerning sustainability issues from the initial stage of the design process, including building and plant life cycle together with owning and operating costs to be considered at all stages in the design process;— to assess the proposed design with rational criteria for indoor air quality, thermal comfort, acoustical comfort, visual comfort, energy efficiency and HVAC system controls at every stage of the design process;— to make iterations between decisions and evaluations of the design throughout the design process.The building environment design involves not only architectural design associated with environmental quality but also environmental system design associated with effective controls. This International Standard is applicable to building environment design for new construction and the retrofit of existing buildings.
ISO 16813-2006 - 中外标准 - ISO- 2006/1 - 现行
关键词：建筑设计建筑声学建筑物设计建筑物建筑定义设计环境一般条件室内气候室内内部寿命计划项目规划使用寿命维持温度致适利用 Architectural design Building acoustics Building designs Buildings Construction Definition Definitions Design Environment General conditions Indoor climate Indoors Internal Life (durability) Planning Project planning Service life Sustainability Thermal comfort Utilization

3 道路运输和交通远程信息处理.自动车辆和设备识别.系统规范 - 摘要
NF P99-706-2006 - 中外标准 - NFBASE- 2006/1 - 现行
关键词：自动控制系统数据传输定义英语识别信息交换无线电通信道路运输规范系统体系结构远程信息管理远程处理交通业务交通运输信息交通管制车辆设备运载工具 Automatic control systems Data transmission Definition Definitions English language Identification Information interchange Radiocommunication Road transport Specifications System architecture Telematics Teleprocessing Traffic Traffic and traveller informations Traffic control Vehicle equipment Vehicles

4 房屋和建筑资产.服务寿命规划.第6部分:实践中服务寿命数据的反馈评价性能 - 摘要

This part of ISO 15686 provides a generic basis for performance evaluation for feedback of service life data from existing buildings and constructed assets, including a definition of the terms to be used and the description of how the (technical) performance can be described and documented to ensure consistencies.
ISO 15686-7-2006 - 中外标准 - ISO- 2006/1 - 现行
关键词：建筑物建设工程环境影响外部监督生物圈成本计算生物圈寿命计划质量保证质量检查服务寿命结构构件监督(认可) 利用 Buildings Construction works Environmental effects Foreign surveillance Life cycle costing Life cycles Life (durability) Planning Quality assurance Quality auditing Service life Structural members Surveillance (approval) Utilization

5 建设项目竣工环境保护验收技术规范.电解铝 - 摘要

本标准规定了电解铝工业建设项目竣工环境保护验收范围确定、执行标准选择的原则；工程及污染治理、排放分析要点；验收监测布点、采样、分析方法、质量控制及质量保证、监测结果评价技术要求；验收调查主要内容以及验收监测方案、报告编制的要求。本标准适用于电解铝工业新建、改建、扩建和技术改造项目竣工环境保护验收。
HJ/T 254-2006 - 中外标准 - HBBASE- 2006/1 - 现行
关键词：建设项目竣工环境??验收技术规范电解铝

6 建设工程项目管理规范 - 摘要

本规范适用于新建、扩建、改建等建设工程有关各方的项目管理。本规范是建立项目管理组织、明确企业各层次和人员的职责与工作关系，规范项目管理行为，考核和评价项目管理成果的基础依据。
GB/T 50326-2006 - 中外标准 - GBBASE- 2006/1 - 现行
关键词：建设工程规范管理施工建筑规范建设系统

7 设备管理.如何制定设备管理协议的指南 - 摘要

This European standard provides guidance on the preparation of agreements for Facility Management work.This European standard is applicable to:– Facility Management agreements for both public and private European Union cross-border, as well as domestic,client/Facility Management service provider relationships;– full range of facility services;– both types of Facility Management service providers (internal and external);– all types of working environments (e.g. industrial, commercial, administration, military, health etc.).This European standard is applicable to services that are primarily characterised by the following properties:– business to business services;– managed by the Facility Management service provider;– recurring type operations greater than a one year duration;– performance oriented;– prices or mechanisms to determine prices for services, which are closely linked to performance.In EN 15221-1 the scope of Facility Management is described.This standard is primarily written for Facility Management agreements between a client and an external FacilityManagement service provider. However, a large part of this standard can be applied to cases where the Facilitymanagement service provider is an internal entity within the client's organisation and be very helpful to set up anapproach based on Services Level Agreements (SLA).This standard does not replace any specialized standards related to services within the scope of the FacilityManagement agreement. Applicable standards should be followed.The standard does not:– provide standard forms for Facility Management agreements;– determine rights and obligations between the client and the Facility Management service provider;– detail employment conditions in regard to Facility Management agreements, although such details are extremelyimportant;– give detail concerning the management of environmental issues.
BS EN 15221-2-2006 - 中外标准 - BSBASE- 2006/1 - 现行
关键词：协议基本家用设备建筑物管理建筑物合同协议定义效力设备管理特点指导手册工业管理管理管理计划操作组织性能服务设施规范(验收) 热环境系统 Agreements Basic domestic facilities Building management Buildings Contract agreement Definition Definitions Effectiveness Facility management Features Guide books Industrial management Management Management planning Operation Organization Performance Services Specification (approval) Thermal environment systems

8 欧洲法规 1.建筑物的作用.筒仓和槽罐 - 摘要

1.1.1 Scope of EN 1991 - Eurocode 1(1)P EN 1991 provides general principles and actions for the structural design of buildings and civilengineering works including some geotechnical aspects and shall be used in conjunction with EN 1990 and EN1992-1999.(2) EN 1991 also covers structural design during execution and structural design for temporary structures. Itrelates to all circumstances in which a structure is required to give adequate performance.(3) EN 1991 is not directly intended for the structural appraisal of existing construction, in developing thedesign of repairs and alterations or for assessing changes of use.(4) EN 1991 does not completely cover special design situations which require unusual reliabilityconsiderations such as nuclear structures for which specified design procedures should be used.1.1.2 Scope of EN 1991-4 actions on structures: silos and tanks(1)P This part provides general principles and actions for the structural design of silos for the storage ofparticulate solids and tanks for the storage of fluids and shall be used in conjunction with EN 1990, other partsof EN 1991 and EN 1992 to EN 1999.(2) This part includes some provisions for actions on silo and tank structures that are not only associated withthe stored solids or liquids (e.g. the effects of thermal differentials, aspects of the differential settlements ofbatteries of silos)(3) The following geometrical limitations apply to the design rules for silos:- the silo cross-section shapes are limited to those shown in Figure 1.1d, though minor variations may beaccepted provided the structural consequences of the resulting changes in pressure are considered;- the following dimensional limitations apply:hb/dc < 10hb < l00 mdc < 60 m- the transition lies in a single horizontal plane (see Figure 1.1a);- the silo does not contain an internal structure such as a cone or pyramid with its apex uppermost, crossbeams,etc. However, a rectangular silo may contain internal ties.(4) The following limitations on the stored solids apply to the design rules for silos:- each silo is designed for a defined range of particulate solids properties;- the stored solid is free-flowing, or the stored solid can be guaranteed to flow freely within the silo containeras designed (see 1.5.12 and Annex C);- the maximum particle diameter of the stored solid is not greater than 0,03dc.(5) The following limitations on the filling and discharge arrangements apply to the design rules for silos:- filling involves only negligible inertia effects and impact loads;- where discharge devices are used (for example feeders or internal flow tubes) solids flow is smooth andcentral.(6) Only hoppers that are conical (i.e. axisymmetric), square pyramidal or wedge-shaped (i.e. with vertical endwalls) are covered by this standard. Other hopper shapes and hoppers with internals require specialconsiderations.(7) Some silos with a systematically non-symmetric geometry are not specifically covered by this standard.These cases include a chisel hopper (i.e. a wedge hopper beneath a circular cylinder) and a diamond-backhopper.(8) The design rules for tanks apply only to tanks storing liquids at normal atmospheric pressure.(9) Actions on the roofs of silos and tanks are given in EN 1991-1-1, EN 1991-1-3 to EN 1991-1-7 and EN1991-3 as appropriate.(10) The design of silos for reliable solids discharge is outside the scope of this standard.(11) The design of silos against silo quaking, shocks, honking, pounding and silo music is outside the scope ofthis standard.NOTE: These phenomena are not well understood, so the use of this standard does not guarantee that they will notoccur, or that the structure is adequate to resist them.
BS EN 1991-4-2006 - 中外标准 - BSBASE- 2006/1 - 现行
关键词：灌注散装物料土木工程建筑建筑工程建设工程定义尺寸选定效应欧洲法规冷凝受液器荷载能力负荷数学计算额定值筒仓规范(验收) 储存结构工程制图结构 Bottling Bulk materials Civil engineering Construction Construction engineering Construction works Definition Definitions Dimensioning Effects EUROCODE Evacuations Fluid receivers Load capacity Loading Mathematical calculations Ratings Silos Specification (approval) Storages Structural engineering drawings Structures

9 欧洲法规1.结构作用.第3部分:起重机和机械感应作用 - 摘要

(1) Part 3 of EN 1991 specifies imposed loads (models and representative values)associated with cranes on runway beams and stationary machines which include, whenrelevant, dynamic effects and braking, acceleration and accidental forces.(2) Section 1 defines common definitions and notations.(3) Section 2 specifies actions induced by cranes on runways.(4) Section 3 specifies actions induced by stationary machines.
BS EN 1991-3-2006 - 中外标准 - BSBASE- 2006/1 - 现行
关键词：Structural systems Structural design Structures Buildings Loading Mathematical calculations Cranes Imposed loading Dynamic testing Braking Acceleration Acceleration Brake force Civil engineering Construction Construction engineering Crane runways Cranes Definition Definitions Effects EUROCODE Machines Mathematical calculations Specification (approval) Stationary Structural engineering drawings Structures Useful load

10 欧洲法规1.建筑物的作用.一般作用.附加作用 - 摘要

(1) EN 1991-1-7 provides strategies and rules for safeguarding buildings and other civil engineeringworks against identifiable and unidentifiable accidental actions.(2) EN 1991-1-7 defines:– strategies based on identified accidental actions,– strategies based on limiting the extent of localised failure.(3) The following subjects are dealt with in this part of EN 1991:– definitions and symbols (Section 1);– classification of actions (Section 2);– design situations (Section 3);– impact (Section 4);– explosions (Section 5);– design for consequences of localised failure in buildings from an unspecified cause (informativeAnnex A);– information on risk assessment (informative Annex B);– dynamic design for impact (informative Annex C);– internal explosions (informative Annex D).(4) Rules on dust explosions in silos are given in EN 1991-4.(5) Rules on impact from vehicles travelling on the bridge deck are given in EN 1991-2.(6) EN 1991-1-7 does not specifically deal with accidental actions caused by external explosions, warfareand terrorist activities, or the residual stability of buildings or other civil engineering works damaged byseismic action or fire, etc.
BS EN 1991-1-7-2006 - 中外标准 - BSBASE- 2006/1 - 现行
关键词：事故预防基础桥建筑物土木工程分类碰撞(事故) 组件计算建筑建设工程定义设计尺寸选定效应欧洲法规爆炸物影响数学计算计划特性安全要求抗震性规范(验收) 稳定性结构工程制图结构工程结构验证 Accident prevention Basis Bridges Buildings Civil engineering Classification Collisions (accident) Components Computation Construction Construction works Definitions Design Dimensioning Effects Eurocode Explosions Impacts Mathematical calculations Planning Properties Safety requirements Shock resistance Specification (approval) Stability Structural engineering drawings Structural works Structures Verification

共 4 页 1 2 3 4 下一页末页

火力发电

环境保护

电站锅炉

汽轮机

汽轮发电机

热工控制

水力发电

水电站类型

水工建筑物

主要坝型

水电站主要设备

智能水电厂

核能发电

反应堆

核电设备

核电安全

风力发电

风电场

风电机组

风电设备

运行方式

光伏发电

核心设备

电网影响

光伏应用

电力输送

高压直流输电(HVDC)

柔性输电

输电线路

保护及重合闸

变电系统

一次设备

二次设备

变电站继电保护

智能变电站

变电站分类

研究专题

配电网

主要设备

关键技术

配电自动化

接地方式

故障及分析方法

设计规划

电源及负荷规划

电网规划设计

计算和分析

无功补偿和电压调整

经济性

电力行业论文

能源、技术类论文

经营管理类论文

相关论文

电力行业期刊

行业学会/协会/企业刊物

电力期刊按学科分类

电力期刊按行业分类

电力行业成果

电力行业成果学科分类

电力行业专利

电气工程

热力工程

水利工程

转动机械

燃料、化学

信息通讯

其他相关专利

电力工业标准

能源、核技术

电工

电子与信息技术

仪器仪表

工程建设

其他相关行业

电力行业机构

电力企业

采矿业

制造业

展开标准分类

展开标准类型