资源分类
电力行业论文
电力行业期刊
电力行业成果
电力行业专利
电力工业标准
能源、核技术
电工
电子与信息技术
- > 电子元器件与信息技术综合
- > 电子元件
- > 电真空器件
- > 半导体分立器件
- > 微电路
- > 计算机
- > 信息处理技术
- > 电子测量与仪器
- > 电子设备专用材料、零件、结构件
- > 电子工业生产设备
仪器仪表
- > 仪器、仪表综合
- > 工业自动化仪表与控制装置
- > 电工仪器仪表
- > 物质成分分析仪器与环境监测仪器
- > 实验室仪器与真空仪器
- > 试验机与无损探伤仪器
工程建设
其他相关行业
电力行业机构
电力企业
采矿业
制造业
- > 通用设备制造业
- > 专用设备制造业
- > 交通运输设备制造业
- > 电气机械及器材制造业
- > 通信设备、计算机及其他电子设备制造业
- > 仪器仪表及文化、办公用机械制造业
- > 金属制品业
- > 非金属矿物制品业
蒸汽传热管破裂事故中颗粒物喷射的数值模拟 2018年2月10日 【正式出版版本】 【曾经优先出版版本】
蒸汽传热管破裂事故中颗粒物喷射的数值模拟
Numerical simulation of particulate matter injection in the steam generator tube rupture accident 2018年2月10日 【正式出版版本】 【曾经优先出版版本】
Numerical simulation of particulate matter injection in the steam generator tube rupture accident
-
摘要： - 蒸汽传热管破裂事故发生时,一回路中的颗粒物随着高温高压流体一起喷射进入二次侧,会对蒸汽发生器二次侧产生冲击并加速二次侧腐蚀.根据大亚湾核电站蒸汽发生器传热管实际尺寸建模,利用 FLUENT 流体软件,对蒸汽传热管破裂事故发生时的颗粒物喷射过程进行模拟研究.对连续相采取k-ε模型预测湍流变化,多相流模型选择混合模型,对颗粒相采取DPM (Discrete Particle Model)模型跟踪颗粒运动轨迹.研究发现,破口附近是高速场和高温度场,而在破口上方,温度场和速度场逐渐恢复均匀性;在破口上方附近存在回流现象;破口附近颗粒随着流场运动对二次侧管壁产生冲击,破口附近壁面所受到的冲击最严重;在破口上方及背离破口的管道附近存在颗粒物聚集现象,可能导致传热恶化;随着高度的增加,破口的影响开始扩散.
-
Abstract： - [Background] Corrosive particulate matter in high-temperature and pressure fluid in the primary circuit will be injected into the secondary side with while the steam generator tube rupture accident (SGTR) occurs, which could accelerate corrosion of the secondary side. [Purpose] A model was built according to actual size of the steam generator heat transfer tube at Daya Bay nuclear power plant with the code of FLUENT adopted to simulate the injection process. [Methods] The standard k-ε model was used in continuous phase to predict the turbulence variation in the rectangular channel, and mixture model was selected as multiphase model to conduct phase transformation, and the discrete particle model (DPM) was used to track the trajectory of the particulate matter. [Results] The high-temperature speed and concentration field in SGTR appeared near the rupture tube, which would become homogeneous above the tube. There was reflux over the rupture, inducing the particulate matter to flow with the fluid, which would impact the wall of the secondary side, especially that near the rupture tube. Particulate matter aggregation occurs above and back of rupture tube, which might cause deterioration of heat transfer. With the increase of altitude, the influence of the rupture began to diffuse. [Conclusion] It is shown that when there is a steam generator tube rupture accident, the particles can cause abrasion on the wall surface and accelerate corrosion with the movement of flow field.
|
|
张晗
[1]
周涛
[1]
田晓瑞
[1]
周蓝宇
[2]
夏榜样
[3]
|
|---|---|
| Author： | ZHANG Han[1] ZHOU Tao[1] TIAN Xiaorui[1] ZHOU Lanyu[2] XIA Bangyang[3] |
|
|
|
|
|
核技术 ISTIC EI SCI PKU CSSCI |
|
|
Nuclear Techniques ISTIC EI SCI PKU CSSCI |
|
|
2018, 41(2) |
|
|
TL334 |
|
|
颗粒物
蒸汽传热管
破裂
喷射
|
|
|
Particulate matter Steam generator tube Rupture Injection |
|
|
|
|
|
2018年3月26日 |
|
|
国家自然科学基金，教育部博士点基金，核反应堆系统设计技术重点实验室基金(No.2015BJ0151)资助Supported by National Natural Science Foundation of China，Doctoral Fund of Ministry of Education of China，Foundation of Key Laboratory of Nuclear Reactor System Design Technology |
返回顶部参考文献
返回顶部引证文献
返回顶部本文读者也读过
返回顶部相似文献
返回顶部相关博文
京公网安备11010802020237号