知识导航
资源分类

“双渣+留渣”工艺在帘线钢生产中的应用

“双渣+留渣”工艺在帘线钢生产中的应用

Application of“Double Slag and Slag-remaining”Technology in the Production of Tire Cord Steel

Application of“Double Slag and Slag-remaining”Technology in the Production of Tire Cord Steel

doi:
10.3969/j.issn.1004-4620.2016.03.010
摘要:
为满足帘线钢低P、低Ti要求,冶炼过程中采用双渣留渣工艺,一次造渣碱度控制为1.5~2.0,FeO控制在15%~20%,保证了炉渣良好的流动性;二次造渣时加入石英砂,促进化渣,提高炉渣流动性,提高脱磷能力;对留渣炉次采取炉渣固化操作,实行每炉确认制度,防止兑铁发生喷溅。冶炼过程平稳,终点C 0.12%、P 0.0039%、Ti 4.5×10-6,脱磷率达到了95%以上,脱钛率达到了98%以上。
Abstract:
To meet the requirement of low phosphorus and titanium, the double slag and slag-remaining technology was adopted in the smelting process. The slagging alkalinity and FeO are controlled within a range of 1.5~2.0 and 15%~20%respectively for the first slag formation to ensure the good liquidity of slag. The adding of quartz sand can promote slag melting process and improve the liquidity of slag and dephosphorizing capacity for the second slag formation. The slag solidified operating is adopted for slag-remaining furnaces. The confirmation system must be carried out to avoid of splash during pouring melted iron. Smelting process is smoothly, the C is 0.12%, P is 0.003 9% and Ti is 4.5 × 10-6 at the end-point,the dephosphorization and titanium removal rate achieved above 95%and 98%respectively.
作者 赵洪伦 李生根
Author: ZHAO Honglun LI Shenggen
作者单位 山东钢铁集团淄博张钢钢铁有限公司,山东 淄博,256400
期 刊: 山东冶金
年,卷(期) 2016, 38(3)
分类号 TF703.6
关键词: 帘线钢 知识脉络 转炉冶炼 知识脉络 双渣+留渣 知识脉络 脱磷 知识脉络 脱钛 知识脉络
Keywords: tire cord steel converter steel making double slag and slag-remaining dephosphorization titanium removal
机标分类号 TF7 TG1
基金项目
参考文献和引证文献
返回顶部参考文献
返回顶部引证文献
返回顶部本文读者也读过
返回顶部相似文献
返回顶部相关博文

知识产权声明| 服务承诺| 联系我们| 人才招聘| 客户服务| 关于我们

京ICP证:010071  互联网出版许可证:新出网证(京)字042号  京公网安备11010802020237号
万方数据知识服务平台--国家科技支撑计划资助项目(编号:2006BAH03B01)©北京万方数据股份有限公司  万方数据电子出版社